– 31 –
EN
Removing the oven door
X
X
Open the oven
door completely.
The hinges are equipped with two moveable locks.
X
X
To release the
hinge lift the lock
and hold the door
at the sides near
the hinges.
X
X
Turn the two block
hooks down.
X
X
Ensure that the block hooks are turned down
completely.
X
X
Close the door
halfway.
X
X
Pull the door
outwards.
Mounting the oven door
After cleaning, the oven door has to be mounted again.
X
X
Slide the hinges into their grooves.
X
X
Turn the two block hooks (used as hinge
attachments) upwards.
CAUTION! Damage to the oven due to wrong
handling!
X
Z
Never try closing the door when one or both
blocks are partially or completely open.
X
X
Close the oven door.
Cleaning the glass panels of the oven door
The oven door and the glass panels can be removed
to enable thorough cleaning of the glass panel.
The oven door has 3 glass panels, 4 glass panels for
pyro model FS 913 P (intermediate glass panel):
– internal glass panel (near the cavity)
– intermediate glass panel (inside the oven door)
– external glass panel
The internal glass panel and the intermediate glass
panel can be removed for cleaning purposes.
The inside of the external glass panel can be cleaned
when the internal and the intermediate glass panel
are removed.
Removing and cleaning the internal glass panel
from the oven door
X
Z
Ensure that the oven is cold before you start
cleaning.
X
X
Open the oven
door completely.
X
X
Turn the two black blocks (with the word
CLEAN,
at the bottom of the door) for 180° so that they fit
into the seats in the oven structure.
FS 913 P BK DCT TFT AUS
FS 913 M BK DCT TFT AUS
