EN
1
1
11
USE
Control panel
Button Function
Display
A
Turns the suction motor on and off at the last
speed used.
Displays the speed setting
B
Decreases the operating speed.
C
Increases the operating speed.
D
Activates intensive speed from any other speed,
even with the motor stopped. Intensive speed is
timed to run for 10 minutes, after which the sys-
tem will return to the speed that was set previ-
ously. Suitable to deal with the highest level of
cooking fumes.
Displays HI and the spot at the bottom
right flashes once a second.
E
Starts the motor at a speed that allows recircula-
tion of 100 m3/h for 10 minutes in every hour;
after which the motor stops.
When the filters alarm is triggered, the alarm can
be reset by pressing and holding this button for
approximately 3 seconds. These indications are
only visible when the motor is turned off.
Displays 24 and the spot at the bottom
right flashes, while the motor is running.
When the procedure has been completed,
the indication previously displayed will
turn off:
FF indicates the need to wash the metal
grease filters. The alarm is triggered af-
ter the Hood has been operating for 100
actual working hours.
EF indicates the need to change the acti-
vated charcoal filters, and also to wash
the metal grease filters. The alarm is
triggered after the Hood has been operat-
ing for 200 actual working hours.
F
Activates automatic shutdown with a 30' delay.
Suitable to complete elimination of residual
odours. It can be activated from any position, and
is deactivated by pressing the button or turning the
motor off.
Alternately displays the working speed
and the time remaining until the hood is
turned off. The spot at the bottom right
flashes.
G
Turns the lighting system (overhead spotlights) on
and off. If pressed and held for 2 seconds it turns
the side lights (Neon strips) on and off.
H
Turns the low intensity lighting system (overhead
spotlights) on and off.
A
B
C
D
E
F
G
H