![background image](http://html1.mh-extra.com/html/franke/fgl-904-i/fgl-904-i_instructions-for-use-and-installation_2327988020.webp)
EN
2
0
20
Recirculation version air outlet
• Fix the connection
15
to the frame using the 4 screws pro-
vided
.
• Fix the flange
10
to the lower opening of the connection
15
.
• Connect the hood air outlet to the flange in the lower part of
the junction using a rigid or flexible ø 150 tube (by installer’s
choice).
15
10
Flue assembly - Mounting the hood body
• Position the upper chimney section and fix the upper part to the
frame using the 2 screws
12c
(2,9 x 6,5) provided.
• Similarly, position the lower chimney section and fix the
lower part to the frame using the 2 screws
12c
(2,9 x 6,5) pro-
vided.
Before fixing the hood body to the frame:
• Remove the grease filters from the hood body.
• Remove any activated charcoal filters.
• From below, use the 4 screws
12f
(M6 x 10)provided to fix the
hood body to the frame.
12f
12c
12c
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
• Connect the control connector
Cmd
.
• Place the connectors in the junction box
24
and close it using
the 2 screws
12e
(2,9 x 9,5) provided.
• Fix the junction box to the hood body using the 2 screws
12c
(2,9 x 6,5) provided.
• For the recirculation version, fit the activated carbon odour fil-
ter.
• Replace the grease filters.
24
12e
Cmd
12c
Summary of Contents for FGL 904 I
