background image

 

 

 

 

 

EN 

1

10 

MAINTENANCE

 

Opening Panel 

•  Open the Panel by pulling it. 
•  Clean the outside with a damp cloth and neutral detergent. 
•  Clean the inside using a damp cloth and neutral detergent; do 

not use wet cloths or sponges, or jets of water; do not use 
abrasive substances. 

 

Metal grease filters 

They can be washed in the dishwasher, and need to be cleaned 
whenever the 

FG

 sign appears on the display or at least once 

every 2 months use, or more frequently if use is particularly 
intensive. 

Resetting the alarm signal 

•  Turn the Lights and the Suction motor off, then disable the 24h 

function, if enabled. 

• Press button 

E

 (see the paragraph on Use). 

Cleaning the Filters 

•  Open the Comfort panels by pulling on the recess. 
•  Remove the Filters one at a time, pushing them towards the 

back of the unit and at the same time pulling downward. 

•  Wash the Filters without bending them, and leave them to dry 

completely before replacing. (If the surface of the filter 
changes colour as time goes by, this will have absolutely no 
effect on the efficiency of the filter itself.)  

•  Replace, taking care to ensure that the handle faces forwards. 
•  Close the Comfort panels. 
 

 

Summary of Contents for FGB 906 W AC













Reviews: