EN
1
17
Mounting the hood body
• Screw the two screws
12d
supplied onto the brackets
7.1
.
• Hook the hood body onto the bracket
7.1,
centring it around
the vertical line.
• Use the adjusting screws
12d
underneath the hood to level the
hood body.
12.d
7.1
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 120 mm,
the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert the re-
ducer flange
9
on the hood body outlet.
• Fix the pipe in position using sufficient pipe clamps (not sup-
plied).
• Remove any activated charcoal filters.
ø 120
ø 150
9
RECIRCULATION VERSION AIR OUTLET
• Push fit the air outlet fitting
15
onto the air outlet of the hood
body.
• Ensure that the activated charcoal filters have been inserted.
15
