Franke FDF 12174 Instructions For Use And Installation Download Page 8

 

 

 

 

 

EN 

8

 

USE

 

A

B

C

D

E

F

G

H

Control board 

Key Function 

Display 

Switches the extractor motor on and off at the 
latest  selected speed  

Indicates the selected speed. 

Decreases the suction speed. 

 

Increases the suction speed. 

 

By pressing this key it is possible to activate  
the intensive speed from any previously se-
lected speed. The intensive speed can be acti-
vated even when the motor is OFF. This speed 
has been timed at 10 minutes. After that time 
the system activates automatically the latest 
selected speed. This function is suitable for  
cooking conditions when vapours and smells 
are of the utmost emission.  

HI  

appears. The spot down on the right side 

flashes once a second. 

By pressing this key it is possible to set up the 
motor to a suction speed at 100 m

3

/h lasting 10 

minutes every hour. After this the motor 
switches off automatically. 
When the filter saturation is going on it is pos-
sible to  reset the alarm by pressing this key for 
about 3 seconds. The indication is visible only 
when the motor is off. 

 

Indicates the  

24-function. 

The spot down on 

the right side flashes and the motor is on. 

Once the process is finished  the previous indi-
cation disappears: 

FF

  Indicates that the metal grease filters 

saturation alarm has been triggered, and 
the filters need to be washed. The alarm 
is triggered after 100 working hours.  

EF

  Indicates that the charcoal filter satura-

tion alarm has been triggered, and the fil-
ter has to be replaced; the metal grease 
filters must also be washed. The charcoal 
filter is triggered after 200 working hours.  

By pressing this key it is possible to set the 
delayed shutdown of the appliance to 30 min-
utes. This function is suitable for a complete 
elimination of the residual smells. It can be 
activated at any position, and it is deactivated 
by pressing the key again or by switching off 
the motor. 

Indicates alternately the selected speed of the 
hood and the time left before the hood shut-
down. The spot down on the right side flashes. 

Turns the light on and off . 

 

Turns the light on and off at reduced intensity. 

 

 

Summary of Contents for FDF 12174












Reviews: