25
Installation instruction for models (DC 97 P-DG 97 P)
Measure the width of the side panel (S) of the kitchen unit (normally 16, 18 or 20 mm).
16 side panel:
on each mounting bracket (F) install 2 lugs (T) marked with the number
16
.
18 side panel:
and on each mounting bracket (F) install 2 lugs (T) marked with the number
18
.
20 side panel:
the 20 mm side panel does not require the use of lugs.
Position the brackets (F) against the units side panel on the base supporting the oven.
Secure the brackets (F) with the screws (V). Fit the oven into the unit, fully open the door and secure it to the
brackets (F) using the 4 screws (V) and 4 plastic spacers (D).
Installation instructions for model (AX 97 P)
Fit the appliance into the unit; secure
the oven to the unit with the 4 pro-
vided screws through the holes in its
side panels.
If the oven is to be fitted beneath a
cooktop, first rotate the cooktop
mount (R) to the right or left to allow
the oven to enter correctly.
Connection to the mains
Your FRANKE oven is provided with a three-wire power cable with free terminals.
The oven can be connected to the domestic mains power supply as follows:
- junction box
the power cord must be equipped with an omni-polar power switch with air gap between the contacts of at
least 3 mm
- plug (mains socket)
a) must be suitable for a 16A current
b) must be accessible
c) must be closed or located in such a manner that live components are not accessible when fitting or
removing the plug
d) the plug must be capable of being fitted into the socket without difficulty
e) once the plug has been fitted into the socket, the oven must not exert any force on the plug when in-
stalled in the unit
f) do not connect the terminals of two appliances to a single plug
g) make sure to observe the polarities of the free terminals
(Brown = Live - Blue = Neutral - Yellow Green = Earth)
N.B.: Make sure that your domestic power rating (voltage, maximum power and current) is compatible with
your FRANKE oven.
All manuals and user guides at all-guides.com
