ELECTRICAL CONNECTION •
Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm.
• Remove the grease filters (see paragraph Maintenance) being sure that the connector of the
feeding cable is correctly inserted in the socket placed on the side of the fan.
Metal grease filters
Metal filters can be washed also in a dish machine. They need to be washed every
time a drop-symbol appears in the display or at least every two months. In case of
very frequent use these have to be washed even more often. Alarm reset • Press
the G-key for at least 2 seconds.
Cleaning
• Open the comfort panel.
• Remove the filters one by one by pushing them backwards and pulling them
down contemporaneously.
• Wash the filters. Pay attention not to bend them. Make sure that filters are
completely dry before putting them into their seat. (a possible modification of the
filter surface doesn’t influence its efficiency).
• Place the filters again into their seats and make sure that the handle of the filter
remains outside.
• Close the comfort panel.
5
