Franke 2195 00 23, Installation And Operating Instructions Manual

Page: 6 / 20

6
18
-05.
078
e-GB
.f
m
11.5 Remove the pressure cap and the spring.
11.6 Use a socket spanner to remove the functional part.
11.7 Reassemble in the reverse order.
11.8 Check the flow duration and correct if necessary (see Chapter 10. ).
12. Fault Correction
If you are unable to correct a fault, or if the fault is not described in the table, please
inform the customer service department.
13. Replacement Parts
Fault Cause Remedy
Valve does not open – Stop valve is closed
– Functional part faulty
➯
Open it
➯
Replace it
Valve does not close – Functional part faulty
➯
Replace it
Water flow too weak – Shower head/outlet is clogged with dirt
– Supply pressure too low
– Water volume regulator is not fully opened ➯ Cleaning
➯
Check it
➯
Open it
Flow duration too
short or too long – Incorrect setting
– Shower head/outlet is clogged with dirt
– Functional part faulty
➯
Adjust it
➯
Cleaning
➯
Replace it
Designation Order No.
1 Pressure cap. . . . . . . . . . . . . . . . . 82-500-01.028
1a Cover platelet . . . . . . . . . . . . . . . . 82-100-03.290
2 Functional part
Shower systems . . . . . . . . . . . 82-100-20.389
Washing bays . . . . . . . . . . . . . 82-100-20.390
3 Valve seat with O-ring . . . . . . . . . . 82-500-01.017
4 Slide-on rosette . . . . . . . . . . . . . . 82-100-10.397
Spare parts kit consisting of:
Rubber parts
Pressure spring
Circlip . . . . . . . . . . . . . . . . . . . 82-500-01.009