5
ZMI
_001_
2030
021
142
-A
T3O0
051_#
SEN_#
AQU_
#V1.
fm
6. Technical specifications
7. Scope of delivery
8. Dimensions
9. Install the electrical T-distributor
☞
Important!
The components of the electrical T-distributor may only be installed after the power
has been switched off.
☞
For system cable recommendations, see
Chapter 12.
, Accessories.
When using cables other than the system cable, pay attention to the different colour
code. The outer diameter must not exceed 7.5 mm.
9.1
Remove the sheathing (a) of the system cable (approx. 40 mm).
9.2
Push the cap nut (c) onto the system cable (b) up to the limit stop.
Operating voltage:
24 VDC
Power consumption:
4 W
Communication:
Ethernet via ECC function controller
Protection class:
IP 68
Quantity
Name
1
Motor
1
Electronic module
2
Pressure cap
2
Electrical T-distributor
1
Adapter cable
1
Safety cap
1
Cover plate
1
Installation and operating instructions
