5
18
-05
.5
3
9b-GB.fm
7.10
Attach the connecting hose to the valve.
7.11
Mount the corner valve.
7.12
Assemble the pipe odour trap.
7.13
Slide the pipe odour trap into the wall.
7.14
Hook in the drinking fountain.
7.15
Fasten the drinking fountain with the screws.
7.16
Mount the pipe odour trap on the discharge valve.
7.17
Mount the hose with the seal to the corner valve.
7.18
Check the connections for leaks.
7.19
Use the special bit (provided) to fasten the bottom plate.
8.
Function
When the upper part is pressed, water flows.
When the upper part is released, water-flow stops.
9.
Adjusting the Flow Pressure
9.1
Remove the screw with the seal.
9.2
Use a small screwdriver to adjust the flow pressure.
9.3
Insert the seal and screw in the screw.
10. Fault Correction
If you are unable to correct a fault or if the fault is not described in the fault correction
section, please inform our customer service department!
11. Replacement parts
Fault
Cause
Remedy
Water does not flow
– Stop valve is closed
➯
Open it
– Grit filter is clogged with dirt
➯
Clean it
– Push-button drink bubbler outlet is
contaminated
➯
Clean it
Replace it
– Push-button drink bubbler actuator
defective
➯
Replace it
Designation
Order No.
1
Fitting complete . . . . . . . . . . . . . . . . 2002 31 56
2 Drinking spout . . . . . . . . . . . . . . . . . 9E00 14 69
3 Upper part . . . . . . . . . . . . . . . . . . . . 9E00 06 00
4 Cover and regulator screw. . . . . . . . 9E00 14 65
Sealing kit . . . . . . . . . . . . . . . . . . . . 9E00 04 76
Special bit for bottom panelling . . . 0021 58 56
Summary of Contents for 2000 03 01
Page 9: ...9 18 05 539b PL fm Notizen...
Page 10: ...10 18 05 539b PL fm Notizen...
Page 11: ...11 18 05 539b PL fm Notizen...