Frank FRSM 302 C TD BK, Installation And User Manual

Page: 9 / 136

– 9 –
EN
CONTROL PANEL
FRSM 302 C T BK AUS FRSM 302 C TD BK
1 8 9 2
4 2 4
5
10
6
3
3
1 10 8 9 2
2 3 4 7 4
5 6 3
1.
Power ON
2.
Cooking area
3.
Power display
4. Less/More
5. Timer
6.
Display timer
7.
Double-circuit LED
8.
Power ON LED
9. Decimal point
10. Timer decimal point
CONTROLS
The cooking hob is controlled by an electronic microprocessor. The
control software detects both controls and the presence of any abnormal
operating conditions, such as:
•
the spilling of liquids or presence of other objects on the control
panel;
• presence of condensate inside the hob.
In the event of any of above conditions, the system sets to safety
alarm status: the powered-on plates are immediately turned off and an
error code is displayed. Standard operation is resumed once the cause of
the alarm condition has been removed. If operation is not restored,
it may be necessary to disconnect the mains power and reconnect it.
TOUCH KEYS
All operations can be performed using the touch keys (capacitive
sensors) located on the front face of the control panel; Each key
corresponds to as display.
Each activity is confirmed by a beep.
DAILY USE
TOUCH CONTROL HEATING ELEMENTS
TOUCH CONTROL HEAT INTENSITY
1
weak
2-3 gentle
4 slow
5-6 medium
7-8 strong
9 very strong
SWITCHING ON THE DEVICE
1. Press the key (1) to activate the control: the adjustment-level
indicators (3) show “0” and a power-on LED appears under the
1 key.
2. Perform the next operation within 10 seconds, otherwise the
device will switch off automatically.
ADJUSTING POWER AND THE TIMER BY MEANS OF THE AND
KEYS
Use the and keys (4) to adjust the setting of the plates and the
required time on timer/minute counter (6). The and controls
(4) are common to both functions. Accordingly, to regulate the power of
the hob, first select the zone with key (2), then adjust the relative power
level using the and keys (4); this done, select the timer function
with key (5) and proceed to set the duration, likewise using the or
key (4).
SWITCHING ON THE COOKING AREA
Once the device has been activated, switch on the cooking area (within
10 seconds) as follows:
1. Press one of the keys (2) to select the cooking area required.
2. The related display is brighter.
3. Use the
and keys (4) to adjust the heat level (from 1 to 9).
Press and hold down these keys to increase or decrease the setting.