Fitting Instructions for Lite Range Cabin Model
Preparing the Mounting Position
Using the template provided mark out and drill the fixing holes through the
deck or cabin roof. In the case of cabin control models, a centre hole is also
required to allow the mechanism to pass through.
Mounting the Searchlight
For Deck Models:
Fit the ‘O’ ring in position and bolt the searchlight base securely down. On an
uneven surface it is necessary to use a suitable sealant, such as silicone, in
order to ensure a weather proofed joint.
For Cabin/Cabin Pedestal Models:
1.
Remove the Base Lock Wheel.
2.
Replace Lock Wheel
with
M8 x 10 hexagon screw
in the bottom fixing
3.
Now remove the following
items as these are only required
on deck models Barrel Lock Wheels,
Elevation Link and fixings
4.
When installing the Under Deck
mechanism, first separate the following
items. U-Piece Assembly, M8 nyloc nut, M8
plain washer, M12 plain washer, Rubber
Bellows, Bellows Top Bush and the Push
Rod Top Bush
.
