13 Install the floor threshold
1.
Set the threshold down at the doorway.
2.
Slide the threshold against the door frame.
Note:
Make sure that the side frame seals are not between the threshold and
the door frame. Neatly cut the side frame seal to the correct length, if needed.
Note:
Make sure that the side frame seals and the threshold seal do not
overlap. Neatly cut the side frame seal to the correct length, if needed.
Note:
Make sure that the protective plastic on the aluminum frames is not
under the threshold. Peel back further, if needed.
Framery Q Working with PAL Installation instructions
[email protected]
73
