STEP 4
:
Layout the timbers for the second level flat on the ground while referencing
the diagram below. Place the cross timber for level 2 on top of the upside
stakes to ensure it will fit. Once adjustments have been made, the stakes can
be hammered into the ground and the second level can be stacked.
A
A
B
C
C
C
C
STEP 5:
Connect 6 timbers for level 3 with stacking brackets on both ends
and stack them as you did for level 1..
2 x cross
timbers on a
4-level design.
1 x cross timber
for a 3-level design.
3 LEVELS
4 LEVELS
Note:
Stacking stakes insert into the top of the previous level stakes.
STEP 6:
Connect 7 timbers for level 4 in the same quantity and pattern as
you did for level 2. Stack and connect them in the same way as
well.
