FRAMA AG
CH-3438 LAUPERSWIL / BERN
TITLE:
SERVICE MANUAL
SUBJECT
:
AUTOMATIC FEEDER MATRIX AF / AFS
AUTHOR(S)
:
ROLAND BÄRTSCHI (BAER)
FILE:
PER_MAN_R0102_EN_SERVICE MANUAL AF_AFS.DOC
DOC. REF:
DOC.
R01.02
CREATED
:
31.10.13 16:10
MODIFIED
:
19.11.13 13:11
PAGE
36
OF 40
10.2.3.
Belt - Motor transmission
Receiving the correct tension for tooted belts, most motor positions in Matrix Systems are adjustable. The
process, explained in this chapter, is valid for all transmissions motor pinion - cogwheel.
Loose both screws
(1).
Move the motor in its position to
receive the correct belt tension.
Tighten the motor.
Note:
There is no recommended value for this
adjustment. Make sure that the
transmission turns without high
resistance.
Figure 62: Adjustments - Belt
10.2.4.
Belt – Manual Control for correct belt tension
Test for free movement of the drive
Test, by turning of all rollers by hand, its
free rotation. There should not be a
feeling of high resistance or rough
running.
In case of rough running the belt
tension of the corresponding
transmission may be too tight.
Lower the belt tension.
Figure 63: Adjustments - Belt
1