FRAM FTP-850BK, Manual

Page: 10 / 25

9
FOR THE FIRST USE
As there is manufacturing residue or oil remained in the toaster or heat element, usually it will emit
the odor for the first use. It is normal and will not occur after several times use, for the first use it
is suggested the operation according to the below steps, except without bread, then let the toaster
cool down and begin toasting the first slice.
USING YOUR TOASTER
1. Put bread slice into the bread slot, which can be inserted two slices at most every time. If only
toasting one side or irregular bread, the bread must be put on the toast rack which only can be
toasted one piece every time. When toasting on the toast rack, raise rack control handle to make it
uplift, then put the bread on the toast rack. Press down the rack control handle to reset the rack
when not in use.
NOTE:
a) Make sure the crumb tray is completely positioned in place before using.
b) Before toasting on the toast rack, let the appliance cool down.
2. Plug the power cord into the outlet.
3. Set color control knob to your desired color. There is 7-position level (see fig.1), the lowest
“ 1 ” is
for light and the highest “ 7 ” is for dark. The bread slice can be toasted to golden color at the middle
position.
NOTE:
a) Toasting color for one slice is darker than that for two bread slices at the same level.
b) If toasting continuously, toasting color for the latter bread is darker than that for the anterior
bread at the same level.
c) Please use 1 to 3 position for toasting one slice bun bread for toast rack in the center.
4. Lower carriage handle down vertically until it is latched in place, the indicator of Cancel will be
illuminated, and the appliance will begin toasting at once.
NOTE: The carriage handle can only be latched when the appliance is plugged in.
5. Once the bread has been toasted to the preset color, the carriage handle will automatically pop
up. Also you can uplift the carriage handle a little to remove the bread readily (see fig.2).
5. USING THE APPLIANCE
Fig.1
Fig.2