11
• Before defrosting, place the frozen food in a cool place after wrapping it in sheets of newspaper (this will
help the food to maintain its temperature for longer).
• To accelerate the
defrosting process, place one or more bowls of warm water in the freezer compartment.
• Dry the inside of the compartment with a sponge or a clean cloth.
• Once the unit has been defrosted, place the food into freezer and remember to consume it in a short
period
of time.
• After defrosting is complete, clean the inside of the appliance with a solution of warm water and a little
bicarbonate of soda, then dry thoroughly. Wash all removable parts in the same way and reassemble.
Reconnect the appliance EN - 20 to the mains supply and leave for 2 to 3 hours on setting number '5' before
introducing the food back into the freezer.
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by authorized personnel
only.
Transportation and changing of installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong rope. The i
nstructions
written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation position, all the moving objects (ie,
shelves,
crisper…)
should be taken out or fixed with bands in order to prevent them from getting damaged.
Carry the fridge in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your refrigerator door, if the door handle on your
refrigerator is installed from the front surface of the door.
• I
t is possible to change the opening direction of the door on models without any handles.
•
If the door opening direction of your refrigerator may be changed, you should contact the nearest
Authorised Service Agent to have the opening direction changed.
If the fridge freezer is not working properly, it may be a minor problem, therefore to save time and money,
check the following, before calling an electrician.
What to do if your appliance does not operate
Check that:
• There is
no power
• The general switch in your home is disconnected
• The thermostat setting is on the «•» position
• The socket is not faulty. To check this, plug the appliance in to another socket which you know is working.
What to do if your appliance performs poorly
Check that:
• You have overloaded the appliance.
• The thermostat setting is on position “1” (if so set the thermostat dial to a suitable value).
• The doors are closed properly,
• There is no dust on the condenser,
• There is enough space
at the rear and side walls.
If your fridge is operating too loudly
Normal Noises
Cracking (Ice cracking) Noise:
During automatic defrosting.
9.
TROUBLESHOOTING
