Fraco FRSM-8000, User Manual, Page: 42 / 69

Installation
1-Install the wall tie and the central tube.
2-Locate the place to drill the holes for the turnbuckles using page IV-4.
3-Level the mast using the turnbuckles. (adjustment TYPE #2 & #3)
4-Drill a hole in the angle iron for the central tube. (adjustment TYPE #1)
WARNING : Before making any modification to a
structural component, have an engineer approve it.
Anchor bolted to an angle iron
IV-6 FRSM-8000 user's guide 09/2002 ©FRACO Products Ltd
5-Make sure all the pins are in place and are secured by cotter pins.
6-Lock the anchor in putting the turnbuckles in tension and the central tube in compression.