Fracarro DVR MILANO 16, Quick Reference

Page: 37 / 138

Quick Reference DVR MILANO
E
N
G
L
IS
H
37/138
Connect the BUS RS-485 of the ca mera to the back panel of the DVR.
Press “MENU”, than “SETUP” and “ RS-232/422/485
Setup” on the DVR for enter to the BUS configuration
and enter the same Protocol (Model) and Baud Rate of
the PTZ ca mera .
RS-232/ 422 /485 Setup
COM Port RS-232 RS-422/485
De vice Type PTZ
Model Pelco (D-Type )
Baud Rate 4800
Data Bit 8
Stop Bit 1
Parity None
DVR/Camer a ID 0
Press “MENU” , than “SETUP” and “Pre-Ca mera
Setup” on the DVR and enter the ID Address of the
single PTZ ca me ra.
ATTENTION: Ple ase be sure that all c amer as have
di fferent ID Address.
Pre-Camera Setup
REC Resoluti on 720x288
Water mark
√
Gr oup
Camer a Installe d PTZ ID 1 2 3 4 5 6 7 8
1
√
N/A
2
√
1
… … …
Now the ca mera it is correctly connected to the DVR and is possible to manage it using the remote controller, mouse or the
PC software.