30
English
The others can be identified in the various menus: by pointing the mouse over the parameters
a question mark appears and by clicking on the right hand key on the mouse the following type
of screen opens:
To monitor the program decrypt, it should be enabled from this general menu and then, if there
are problems, from the menu for each program (enabled from the input program list menu <
>)
For each monitorable parameter, the monitoring can be enabled, the alarm message text can be
personalized that will be sent and for certain parameters the function range, i.e. the minimum
and maximum tolerated values, can be set.
Important: monitoring can only be activated for the output programs.
NB: for the changes to be effective click on “Apply” or “OK”.
In the green option bar at the top select “Configuration”-> “Monitoraggio”
“History” the following screen opens:
In this screen, the history of the monitored events can be viewed and searched.
It shows the event ID, the module, the date, the time, the value, if an alarm was generated and
the event description.
