Fracarro 287430, Quick Manual, Page: 9 / 32

9
ENGLISH
STREAM
Stream
Set Service Name
Port Number:
1
2) Press the “Enter” button to enter the next page for selecting port number.
1) Following the main menu flow charts enter the ‘Stream’
Port Number:
＊
1
3) Press the “Enter” button to enter the adjustment mode. The LCD dis-
play will show an asterisk “
＊ ” in the upper right corner.
4) Now you can use UP or Down button to select the port number you
needed. “Enter” to save.
Use the same steps to adjust the following item in submenus.
i
NOTE
A. Set Service Name
Service Name:
HDCH-E58-1 Edit the sevice name by preference.
0~9 ; A~Z ; “-” ; “ ” 15 characters
Are you sure?
y
Are you sure?
n
When all the item in ‘Set Service Name’ are done, there will be a confirm-
ation on the display. Press UP or Down button to select y or n.
Select y for YES, all the settings above will be stored in memory.
Select n for NO to cancel.
B. Set Service ID
Service ID:
1
Edit the sevice ID by preference.
Are you sure?
y When all the item in ‘Set Service ID’ are done, there will be a confirm-
ation on the display. Press UP or Down button to select y or n.
Are you sure?
n Select
y for YES, all the settings above will be stored in memory.
Select
n for NO to cancel.
C. Set LCN
Set LCN:
224 Edit the sevice name by preference.
1~1023
Are you sure?
y When all the item in ‘Set LCN’ are done, there will be a confirm-
ation on the display. Press UP or Down button to select y or n.
Are you sure?
n Select y for YES, all the settings above will be stored in memory.
Select n for NO to cancel.
D. Set PID
Port Number:
1
PMT:
173
1~4
32~8191 (excluding 71)
Suggest using the different PMT PID parameter values if there are
many channel.
i NOTE
3
9
ENGLISHENGLISH
STREAM
Stream
Set Service Name
Port Number:
1
2) Press the “Enter” button to enter the next page for selecting port number.
1) Following the main menu flow charts enter the ‘Stream’
Port Number:
＊
1
3) Press the “Enter” button to enter the adjustment mode. The LCD dis-
play will show an asterisk “
＊ ” in the upper right corner.
4) Now you can use UP or Down button to select the port number you
needed. “Enter” to save.
Use the same steps to adjust the following item in submenus.
NOTE
A. Set Service Name
Service Name:
HDCH-E58-1 Edit the sevice name by preference.
0~9 ; A~Z ; “-” ; “ ” 15 characters
Are you sure?
y
Are you sure?
n
When all the item in ‘Set Service Name’ are done, there will be a confirm-
ation on the display. Press UP or Down button to select y or n.
Select y for YES, all the settings above will be stored in memory.
Select n for NO to cancel.
B. Set Service ID
Service ID:
1
Edit the sevice ID by preference.
Are you sure?
y When all the item in ‘Set Service ID’ are done, there will be a confirm-
ation on the display. Press UP or Down button to select y or n.
Are you sure?
n Select
y for YES, all the settings above will be stored in memory.
Select
n for NO to cancel.
C. Set LCN
Set LCN:
224 Edit the sevice name by preference.
1~1023
Are you sure?
y When all the item in ‘Set LCN’ are done, there will be a confirm-
ation on the display. Press UP or Down button to select y or n.
Are you sure?
n Select y for YES, all the settings above will be stored in memory.
Select n for NO to cancel.
D. Set PID
Port Number:
1
PMT:
173
1~4
32~8191 (excluding 71)
Suggest using the different PMT PID parameter values if there are
many channel.
NOTE
3