UBIFAST CONFIGURATION TOOL
INSTALLATION LeAFLeT
Thank you for purchasing our UBIFAST Configuration Tool. The UBIFAST Configu
-
ration Tool is used to configure the parameters of POSITAL‘s IXARC programmable
encoders through a simple browser based programming interface. Please read this
leaflet thoroughly and carefully before installation and using the device.
UBIFAST Configuration Tool Includes
▪ UBIFAST Configuration Tool
▪ Terminal block adapter to connect encoders with cable exit or to build your own
connecting cables
▪ 12 VDC Power Adapter, Input 100 to 240V AC, 47 to 63Hz and interchangeable
plugs for Europe, UK, US, India, Brazil, China, Argentina, Australia, Korea
Safety Notes
Recommended to use power adapter provided by POSITAL. In case of
replacement, check for compatible supplies with same voltage and current
rating (12 V / 1 A)
Do not remove the Micro-SD card or the Wi-Fi USB Adapter from the confi
-
guration box
Do not connect or disconnect the encoder when device is under power
Do not connect any other devices to unused USB or RJ45 ports on the
Configuration Tool
Do not close browser or webpage when configuration is in progress
www.posital.com
