FPM Agromehanika 627 678, Assembly / Operation/ Maintenance, Spare Parts List

Page: 7 / 62

- For safety reasons, check whether the canvas cover is properly secured and attached to
the frame. If damaged or worn out, replace it immediately with original cover by FPM
AGROMEHANIKA DOO BOLJEVAC.
- Before adjusting, lubricating, or cleaning the mower, lower it to the ground, turn off the
tractor engine, remove the ignition key, turn off the PTO shaft, and apply the tractor
parking brake.
- Wait until all moving parts have come to a stop before approaching the mower.
- Keep away from all mower parts while working.
- Never wear baggy clothes that may be caught into the rotating mower components.
Always wear tight-fitting clothes. Always wear personal protective equipment, safety
goggles, protective gloves and footwear, especially when working on rocky soil.
- Fasten the PTO shaft guard with the provided chains. (PTO shaft guard may not turn). If
the guard is damaged, replace it immediately.
- The operator must ensure that no individuals or animals are in the work area of the
mower, prior to switching the mower on and beginning work. Always keep the consequences of
irresponsible and unsafe work in mind, since this may cause grave harm.
- Remove all foreign objects from the field prior to beginning work.
-
IMPORTANT:
Never work near the roads, pedestrian areas, public spaces (parks, schools,
etc.), and or rocky soil, in order to avoid risk of accidents resulting from
ejected objects.
- Never work when driving in reverse.
- Unauthorised persons, persons without a driving licence, or persons without appropriate
mental and physical abilities are strictly forbidden to operate the mower.
- Only reliable individuals are permitted to operate the mower. Children under 16 are
strictly forbidden to operate the mower.
- Only work under optimal light and visibility conditions.
- After the end of the season, authorized service technician should inspect your mower,
bring it to operable condition, especially regarding the rotor cutters, and tighten all
parts (nuts, screws, etc.) with a required tightening torque.
NEVER IGNORE THESE WARNINGS.
Page 7
Page 7