IN-GNC08
- 9 -
© Future Products Group
OPERATION
Configuration
GN SERIES REFRIGERATED WELL
-
OPERATION
Mechanical
Features
The drop-in well consists of a main
assembly, with integral refrigeration
equipment, in which trays and
gastronorm dishes of various sizes
can be mounted.
The control panel is located on the
main assembly, but since it is
connected by a two metre cable, it
can be easily re-located onto joinery.
Food Display
Options
This versatile refrigerated well can be configured to display food in a variety of
ways:
On adjustable height trays, using dishes or platters
On trays of ice, for fresh fish or similar
In gastronorm dishes of various sizes
Operating
Temperature
The operating temperature of the well is governed by a digital controller.
This is pre-set to maintain the correct chilled air temperature of 2°C to 4°C.
Care must be taken to load the well correctly, to ensure correct product
temperature.
Condensate
and Drain
Condensate water will be released during defrost cycles.
Ideally this should be routed to an external drain, but a removable container
could be used.
An integral boil-off unit is available, as an optional extra, at the time of ordering.
However, unless really good forced ventilation is provided, integral boil-
off trays are not recommended due to potential moisture damage to the
joinery.
Only FPG designed and manufactured joinery is guaranteed against
moisture damage.
Optional
Lighting
An optional lighting gantry is available.
The well assembly has provision for easily mounting the gantry and is pre-wired
to supply power for the overhead LED lighting.
The lighting switch is on the gantry.