FPG IN 3C06S, Product Manual

Page: 52 / 56

Part No.26112 Rev. H August 2018
- 52 - Inline 3000 Square Series Cabinets
Ventilation
REFRIGERATED CABINETS - MECHANICAL DRAWINGS
Under-bench
Enclosure As detailed under Location in the Installation section, adequate ventilation must
be provided for the refrigeration condenser unit.
If the back of the bench is to be enclosed, suitable ventilation grilles and baffles
must be fitted into the joinery panels.
Air Flow Baffles To prevent warm air re-circulating inside the enclosure, baffles must be
constructed to separate the inlet and exit air.
Grille
Dimensions Each grille, in and out, should have a minimum
open area of 730 cm
2
.
A suitable sheet metal grille may be made by
punching a pattern of 49 rectangular holes, each
40mm x 40mm. The holes may be spaced by
5mm.
Suitable grilles can be supplied by FPG, as an
optional extra.
It is not recommended to use louver panels, as
they would have to be very large to achieve the required open area, and be
more prone to becoming blocked with fluff and dust.
Condenser Assy