![background image](http://html1.mh-extra.com/html/fpg/in-3a06/in-3a06_product-manual_2325937017.webp)
IN 3A06/08/12/15
- 17 -
© Future Products Group
SERVICING
Control Gear
AMBIENT CABINETS
-
SERVICING
Location
The electrical control gear is located in the top
of the cabinet. Remove the top plate to access
the control gear.
The chassis has a light switch, power supplies
for the lights and a protective fuse.
The 600 cabinet also has an extractor fan.
Lighting
AMBIENT CABINETS
-
SERVICING
Caution
Do not service lights without isolating the cabinet from the mains supply.
Test Lighting
Components
Before replacing an LED strip, check that its power supply is working.
If there is no dc voltage at the output, the power supply should be replaced.
If there is a dc output, the LED strip must be replaced.
Access to LED
Strips
The LED strips are protected with plastic
covers. These clip into grooves in the
aluminium extrusion.
Remove the plastic cover to access the LED
strip.
The top light assembly is different from the
shelf lights, so the correct replacement unit
must be used.
LED Strip
Replacement
Individual LED modules cannot be
replaced. A complete light unit must
be used.
Connection is made with a plug and
socket. Disconnect the supply lead
from the faulty unit, and reconnect it
to the replacement unit.
Continued on next page