background image

The basics of operation

27

3.7.5

Lists  

Lists (e.g. for adverts, SMS texts) offer all 
available settings in list form. The current set-
ting is shown on a dark background.

Use the arrow buttons to scroll through the 
list. 

Press the respective button to select one of 
the provided settings and return to the Home 
screen. 

3.7.6

Adjustment menus 

A separate menu each opens for editing and selecting settings. There are several 
types of adjustment menus, e.g. lists to choose the settings from and input via key-
pad.

Lists

The left area of the display shows the availa-
ble settings. The current setting is shown with 
a dark background. 

You can scroll the list with a scroll bar if more 
than four options are available. 

Press S

AVE

 to accept the current settings and 

to quit the adjustment menu. 

Press C

ANCEL

 to discard your changes and to 

quit the adjustment menu. 

Note: Some lists feature auto-confirmation. 
Accounts are set directly after pressing the 
respective button, for example.

Current setting

Next page: scroll with

arrow button

Current setting

Accept current

settings

Further available options: 
scroll with scroll bar

Summary of Contents for PostBase













































































































































































































Reviews: