FP PostBase Operator'S Manual Download

Page: 158 / 204

PostBase One Franking System

158

Remove the power sealer and letter catch tray

(PostBase One with Sealer / Power Sealer)

• Pull out both catch brackets.

• Remove the connection cable of the power

sealer from the franking machine: Unscrew
and carefully pull off the plug.

Warning: Mind Your Hands!

Be very careful

when handling the power sealer. As a conse-
quence of its construction design, the power
sealer has very sharp edges that might hurt
you.

• Slightly lift the power sealer and remove it

to the right.

• The envelope slide, which is secured to the

power sealer with two hooks, can now be
easily separated from the power sealer.

Catch brackets

Envelope slide

Summary of Contents for PostBase













































































































































































































Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands

FP PostBase, Operator'S Manual

Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands