10
5 - Configuration overview
Finally, before saving the information,
a summary will be shown of all the
entries, including the manual IP
address and the proxy server.
Check these through before touching
on ‘S
AVE
’.
The meter must restart before the
settings will become active. Touch
‘C
ONTINUE
’ to restart it and test
the connection.
If the machine can’t make a
connection, the wizard will reappear
after rebooting. In this case, you
should first check the connections,
then the settings you have entered.
You can also check the settings with your IT system administrator.
If all goes well, PostBase will now continue with the remainder of its
configuration...
If it can’t connect, the wizard will return to its starting point. In this case, you should
first check the connections and then the settings you have entered.
PLEASE NOTE, YOU WILL NEED TO ENTER YOUR MACHINE SPECIFIC
R-PIN
NUMBER INTO THE MACHINE WHEN PROMPTED, THIS CAN BE FOUND IN
YOUR FP WELCOME PACK.
