FP PostBase Vision Reference Manual Download

Page: 162 / 206

PostBase Vision

162

…

when weighing

Mail piece on the weighing
platform touches the display /
rests on the display.

Especially with larger or flexible mail pieces, they
may touch the display frame.

Raise the display angle

(see chapter 4.4)

No confirmation signal.

Sound volume to low or speaker turned off.
Adjust the volume

(see chapter 4.6)

Scale does not determine the
weight for mail piece placed on
the weighing platform.

The weighing platform was still occupied when
another mail piece was placed on it. The scale can
determine a new weight only if the scale has been
emptied beforehand.

Empty the weighing platform. Place the mail piece.

Letter transport is still running.
Wait until letter transport stops.

The scale operates in the ‘Differential weighing’
mode. The weight is determined upon removing
the mail piece from the weighing platform

(see chapter 5.1.3.2)

The weight is too low or the scale is overloaded.
Use scale for mail pieces of the permitted weight
range only

(see pages 186 and 189)

PostBase Vision does not recognise the scale or
the scale is defective. Contact Customer Service.

(Strange) noises from within
the machine when weighing a
mail piece.

Upon weighing a mail piece, the ink cartridge
moves to the print position. PostBase Vision is
ready to frank a lot faster this way.

These operating sounds when preparing the print
system for franking and returning to the sealed
position are normal and no errors.

Issue

Possible cause and remedy

Summary of Contents for PostBase Vision















































































































































































































Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands

FP PostBase Vision, Reference Manual

Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands