FP FPi2500, Operator'S Manual

Page: 68 / 240

Envelope Sealing Problems
Reference Remedy Possible cause Symptom
See symptom “Flap
not sufficiently
moistened” in this
table. Insufficient moisten-
ing. Envelope not closed
properly.
Job menu on page
10
Make sure sealing is
on in the job menu. The current job has
no envelope sealing.
Loading documents
on page 12
Make sure the side
guides of the docu-
ment feeders are in
the correct position. Documents are not
correctly inserted.
Filling the sealing li-
quid bottle
on page
18
Check water level,
refill if needed. Water level low. Flap not sufficiently
moistened.
Replace brush on
page 49
Check brush, replace
if necessary by the
extra soaked brush. Brush dry.
Clean brush on
page 49
Check brush, clean if
needed. Brush dirty.
Replace brush on
page 49
Replace brush. Brush worn out.
Make sure sealing is
on. The current job has
no envelope sealing.
Envelope specifica-
tions Use envelopes that
meet the specifica-
tions. Envelope does not
meet the specifica-
tions.
Seal an envelope
manually to test the
adhesion quality. Poor envelope qual-
ity.
8
English
63
| Page 63 | nov-29-2012 03:28 |