L1 L2
CN1
-1-
1. Parts and Functions
Ring Volume
Color
Brightness
7" Color TFT screen
TALK Button
UNLOCK Button
ALARM Button
MONITOR Button
Mounting Hook
Volume adjuster
DIP Switches
Non- polarity bus line
Microphone
Speaker
7" Color TFT Screen
UNLOCK Button
TALK Button
Monitor Button
ALARM Button
Speaker
1 2 3 4 5 6
ON
DIP
7
Bell connection port
1 2 3 4 5 6
ON
DIP
7
DIP Switches
Non- polarity bus line
Non- polarity bus line
Volume
Brightness
Color
Ringtone
5" Color TFT Screen
UNLOCK Button
TALK Button
MONITOR Button
ALARM Button
-2-
Ÿ
Using the screws to fix the Mounting Bracket on the wall.
Ÿ
Connecting the system correctly, then hang the Monitor on the mounting bracket
firmly.
Ÿ
Answering a door call
Press CALL button on door station, the monitor rings, the visitor can be
seen on the monitor screen. If nobody answers the call, the screen will
automatically turn off in 30 seconds.
To answer an incoming call, press TALK to answer, calls last for 90
seconds-you DO NOT have to hold talk to enable voice communication.
Press TALK again to end the conversation. If the system connects with two
or more monitors, answering any monitor, the others will turn off
automatically.
If there is an extra camera, during and incoming call, press MONITOR
switch to see the view of extra camera.
1 2 3 4 5 6
ON
DIP
7
DIP Switches
Non-polarity bus line
Bell connection port
Volume
Brightness
Color
Ringtone
Mounting Hook
Speaker
1
4
5
c
m - 1
6
0
c
m
2. Monitor Mounting
3. Operation Instructions
Ÿ
Door Release
During the conversation with the visitor, press UNLOCK button to unlock the
door.
Ÿ
Monitoring
Press MONITOR button while in standby mode you will be able to see the view of
outdoor station camera. Press MONITOR again switch to next door station
camera or extra camera. Press TALK button twice to exit.(firstly you should
have finish setting door station camera and extra camera, see bellow)
Ÿ
Inner Call
User can call other apartments by pressing ALARM button. To start the Inner
call, first you need to setup a dial number on the monitor.
Ÿ
How to setup the dial number on the monitor
？
Keep pressing UNLOCK button until you hear a long beep. Start setting 2 digit dial
number.
MONITOR button refers to first digit 1~9
UNLOCK button refers to 0 / confirm.
Eg. Set the dial number to 09.
press UNLOCK (Long beep) – press UNLOCK – press MONITOR 9 times – press
UNLOCK
Set the dial number to 10.
press UNLOCK (Long beep) – press MONITOR 1 time – press UNLOCK –press
UNLOCK
Set the dial number to 12
press Unlock(Long beep) – press MONITOR 1 times – press UNLOCK – press
MONITOR 2 times -press UNLOCK
Ÿ
How to change the ring tone?
Keep pressing TALK button until you hear a long beep, current ring tone will be
displayed.
There are 9 ring tones to choose from, press ALARM button to choose the ring
tone you want.
Press TALK button again to save and exit.
Ÿ
How to set multiple door station and extra camera?
On door station - Connect the door station with the extra camera, set the Bit-6 to
ON.
On Monitor - Keep pressing ALARM button until it beep. Press MONITOR as many
times as the quantity of door station and extra camera, (for example there are 3
door stations, 2 door station with extra camera, press MONITOR 5 times), press
ALARM again and then cut the power off and re-start the monitor.
By pressing MONITOR button, the camera switching mode could be changed
between manually and automatically.
Ÿ
How to set door station camera and extra camera?
On door station - Connect the door station with the extra camera, set the Bit-6 to
ON.
On Monitor - Keep pressing ALARM button until it beep. Press MONITOR as many
times as the quantity of door station and extra camera, (for example there are 3
door stations, 2 door station with extra camera, press MONITOR 5 times), press
ALARM again. Then cut off the power and restart the monitor.
Press MONITOR until it beep, the camera switching mod e should be changed
bb
between manually and automatically.