FP InovoLabs FP S-Compact BB, Installation And Safety

Page: 7 / 60

For your safety
7
Avoid potential hazards due to unsuitable environmental conditions

Only use the device in enclosed and clean spaces.

Avoid harmful environmental conditions such as heat, sunlight, strong shocks and
vibrations.
2.3 Safety instructions for installation work
Avoiding danger from electrical voltage
Live components and unexpected short circuits can lead to danger to life through
electric shock.

Before starting assembly and installation tasks, disconnect the cables from the
power supply and secure them against being switched on again.

Check that the cables to which the device is connected are voltage-free.

Only use copper conductors for the power supply that meet the specifications in
the Technical data.

Ensure that the supply voltage and earthing is connected correctly (L, N, earth,
compliance with the characteristic values, sufficient conductor cross-section).

Any interventions in the hardware and software, unless they are described in these
instructions, may only be carried out by qualified personnel provided by the manu-
facturer. Hazards from electrical voltage and incalculable behaviour may occur.

Do not use the device if it is damaged.
2.4 Safety instructions for working on an already installed
FP S-Compact
Hazardous areas with live parts
When working on an already installed FP S-Compact, there are areas where there is a
hazard of electric voltage. Inside the device there are live parts behind the protective
cover for the mains supply.
– Danger to life from electric shock when touching live parts.
– Risk of injury from startled reactions when touching live parts.
– Danger of injury by triggering an electrical arc.