74
Premier Diagnostic Platform II i80 ET6842 User's Manual V1.01
8.1 Bluetooth
During the Bluetooth pairing process, make sure the VCI dongle is correctly
powered by either connected to a vehicle or connect to the tablet with the
USB Type-B cable.
To make Bluetooth pairing of the VCI dongle and the tablet
1.
Connect the VCI dongle with a vehicle via diagnostic cable or connect to
the tablet with the USB Type-B cable.
2.
Click the
VCI Manager
application on the i80 ET6842 Menu.
3.
Select
Bluetooth
option from the list.
4.
Select the right device with the i80 ET6842 serial number from the list.
5.
When paring is successfully done, the status is shown as Paired.
6.
Wait a few seconds, and the
button at the toolbar illuminates green,
indicating the tablet is connected to the VCI dongle via Bluetooth.
NOTE
A VCI dongle can be paired with ONE tablet each time.
8.2 Update Firmware
Update
option allows you to update VCI firmware when the new version is
available.
To update the VCI dongle firmware:
1.
Connect the VCI dongle to the i80 ET6842 tablet via USB or Bluetooth.
And make sure the power supply will not be disturbed during the process
of update.
2.
Click the
VCI Manager
application on the i80 ET6842 menu.
3.
Select
Update
option from the option list.
4.
It will start the update automatically. If update failed, please follow the
on-screen instructions to troubleshoot and repeat the process.
