Operating Instructions
www.foxunhd.com
3
）
Indicator of HDMI output
4) Upgrader firmware interface
5) Indicator of power input
6) HDMI input port
7) DIP switch for EDID choosing
00: 4K,
11: Default 1080p output
10: Copy EDID,
01: Mixed EDID
EDID Introduction
00: Mixed EDID:
always follow the lowest resolution of the displays connected to output 2
in order to support all displays show the source.
11: Copy EDID:
output 1 is prior port
a. When output 1 is connected to one display, another display which connected to output 2 will follow the
Resolution of output
b. When output 1 is disconnected, output 2 will output 1080p only.
10: Default 1080p output:
output a default 1080p source, in this case all outputs will display 1080p if they
support resolution 1080p and above.
01: Default 4Kx2K output:
output a default 4Kx2K source, in this case all outputs will display 4Kx2K if they
support resolution 4Kx2K and above.
Note:
Please restart the splitter when change EDID mode!
CONNECT AND OPERATE
1) Connect the HDMI input source to input port of HDMI Splitter
2) Connect the HDMI Splitter output ports to the displays
3) Connect DC 5V1A power to the power port of the FX-SP05.
Typical Application
