Operating Instructions
www.foxunhd.com
3) Connect the HDMI sink (such as HD-LCD
、
HD-DLP) to RX.
4) Connect the IR TX UNIT into IR-Out port of the Transmitter; Connect the IR
RX UNIT into IR-In port of the Receiver.
5) Connect the IR RX UNIT into IR-In port of the Transmitter; Connect the IR TX
UNIT into IR-Out port of the Receiver.
6) Connect the 24V power supply into Transmitter or Receiver.
Attention:
1) Insert/Extract cable gently.
2) Please connect
HDBaseT out and HDBaseT in by one Cat5e/6
cable, please don’t connect HDBaseT port with Ethernet, doing so will damage your unit !
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
PRODUCT SERVICE
1)
Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2)
Servicing Personnel:
Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3)
Replacement parts:
When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4)
Safety check:
After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company
