7
Tiller Control
1. Battery Gauge:
This gauge gives you a guide to the amount of charge left in the scooter’s batteries.
This will give the truest reading when the scooter is in motion.
Note:
Always fully charge the batteries before driving your scooter and never let the batteries become
completely drained, as this may cause permanent damage to the batteries.
2. Horn:
The button operates the scooters horn. This should only be used to warn others of your presence
and not as a rebuke of any form.
Note:
This should only be used to warn others of your presence and not as a rebuke of any form
3.
Maximum Speed Knob:
The speed control enables you to set the maximum speed of the scooter.
Turn clockwise to increase the maximum speed and anti-clockwise to decrease.
Note:
Always start at a slow speed until accustomed with the characteristics of your scooter. Do not put
excessive pressure on the dial. Only turn as far as the stops
4. Front Lights:
This button operates the LED headlight.
5. On/OffKey:
The key switch is located on the right side of the tiller. Simply insert the key and turn
clockwise to switch the power on. The display will light up to indicate the power is on. There may be a
slight delay before the thumb levers operate as the controller checks the scooter’s circuits.
Note
: Never leave the key in the switch unattended to prevent unauthorized use. Do not switch the
power off to stop the scooter unless it is an emergency. The scooter will stop very abruptly if stopped in
this way.