FOXTECHXLINK-50 Long Range Video/Data Wireless Transmitting System
User Manual
10
Installation Instructions
(1)M3*10GB/T818, 4PCS
(2)cross head screwdriver
(3)The depth of threaded hole should be reserved at east 5mm
(4)Torque requirement 6±0.5Kgf;
6.Quick Start
6.1 UI Configuration
XLINK-30 has different data rates, which needs to be configured as needed.
STEP 1 Power on XLINK-30, and link it with PC by Ethernet. Then configure IP Address as shown below:
IP Address 192.168.0.1
Subnet Mask 255.255.255.0
Step 2
Search 192.168.0.9 and enter on browser, next it will show a configuration interface as figure 6., Select the configuration
according to the actual transmission rate, and click "SUBMIT" after the configuration is complete Refer to Table 8 for
the parameter description on the configuration interface.
Step 3
Reboot to activate the configured value.
Step 4
You need to configure the same bandwidth/data rate value for air and ground unit to ensure a successful pairing between
them.
