Remark
：
：
：
1.Dial the control switch to the middle position before turn on the remote controller.
2. One-button to temperature calibration: RC_CH5 channel is quickly changed from mid
position→low→mid→low position (completed within 900ms). The gimbal enters the temperature
calibration mode.
Note
：
：
：
1. If the Seeker-30 Max is directly powered off while recording, an error will be reported after
the gimbal is restarted. As shown in Figure 1. Solution: Press the reset button on the bottom
of the gimbal.
2. The SD memory card must be inserted before using Seeker-30 Max, otherwise an error will
be reported, as shown in Figure 2. Solution: Insert the SD memory card after power off and
then restart the gimbal.
3.
Ensure
that
there
is
no
obstruction
within
the
activity scope
of
the gimbal,
otherwise
it
will
cause
serious
consequences
such
as
the
gimbal
not
working
properly
or
even
burning.
8
Summary of Contents for Seeker-30 TIR
Page 1: ...SEEKER 30 Max 30X Optical Zoom Camera with 3 Axis Gimbal...
Page 5: ...Unit mm 4...
Page 7: ...6...