Seeker 20-360
User Manual
©
2019 FOXTECH All Rights Reserved
5
Notes
1. Put the control channel position to the middle before turning on the remote control
2. One-key temperature: The RC_CH5 channel change fast from middle to down×middle×down (within
900ms), and the pod enters the temperature mode. When the pod start again, the temperature is
completed.
3. The pod can photograph in the video.
The entire operation of the pod is achieved by the SBUS remote control or serial port.
Warning
1. Ensure that there is no obstruction within the scope of the pod, otherwise the pod not working properly or
even burning.
2. SEEKER 20 is a precision device. Do not add hoods, counterweights and other items, otherwise the pod
will burn up.
3. Keep the lens clean. The lens is too dirty may cause the focus slowly.
4. Do not operate the interface, especially the TF card interface, after power off.
5. Do not pull out the TF card during taking pictures or recording, otherwise the images may be lost.
6. Do not disassemble or repair by yourself, otherwise you will not be able to enjoy the warranty policy.
Specification
Pod
Type
Material
Size
Weight
Power
Temperature
Control angle×roll×
Control angle×pitch×
Control angle×direction×
Accuracy
Control signal
Save
Output interface
Working mode
Camera
focal length
Zoom factor
Focusing speed
Video output format
Video storage format
sensor
4.7×84.6mm
20X optical zoom
1S
1080P×25×
1080P×60 frame
1080P×25 frame
1/3” 2.0Megapixel CMOS
Network type HDMI
Aviation aluminum alloy, nylon
106×Length××132×width××173×height×mm
635g
6S-12S
-5××45×
-30°×30°
-120°×30°
360°unlimited
±0.01°
SBus×Serial communication (one-key switching)
TF card
GH1.25 interface×4 core××HDMI interface×one-key switching×
Direction lock; Yam following; One button down