FOXTECH HOBBY
Co., Ltd
Add:
(3rd
Floor)
No.9
Haitai
Fazhan
Sixth
Avenue
Xi
Qing District Tianjin China
Web: www.foxtechfpv.com
Gimbal control
1)Yaw axis control:
speed mode,
connect
s
tick channel(or 3-position
switch
channel,
push
s
tick to middle position to stop)
2)Pitch axis control:
speed mode,
connect
s
tick channel(or 3-position
switch
channel,
push
s
tick to middle position to stop)
3)Mode control:
angle mode,
connect knob channel(speed mode:
connect
3-position
switch channel or Stick channel)
If connecting knob channel,
rotate to one end,
the gimbal is at lowest speed
when controlling YAW and PITCH axis.
Rotate the knob to any position,
gimbal is at higher speed when controlling YAW
and PITCH axis.
Rotate to knob to another end,
gimbal back to center position.
4)Multi:tracking function control
Camera control
1)Zoom control:connect 3-position
switch or
s
tick channel
2)Focus:
connect 3-position
switch or
s
tick
channel for manual focus control.
If do
not connect any channel,
then camera will auto focus after zooming
3)Pic/REC:taking picture/recording,
connect 3-position
switch channel
Flip the
s
tick from middle position to high position,
taking picture/recording mode
switch
Flip the
s
tick from middle position to low position:
A:If under recording mode:record start,flip from middle to low again,record stop B:If
under taking picture mode,start taking picture
