EH314
User Manual
©
2019 FOXTECH All Rights Reserved
4
1. Ensure that there is no obstruction within the activity scope of the pod, otherwise it will cause serious
consequences such as the pod not working properly or even burning.
2. The EH314 optical zoom pod is a precision device. Do not replace the UV mirrors provided by
the unofficial, or add other items such as hoods, counterweights, etc., otherwise it will cause serious
consequences such as poor performance of the pods and even burning.
3. Please keep the lens clean and wipe it with a clean glasses cloth. The lens is too dirty or causes the focus
to slow down or even can’t focus etc.
4. Do not pull out the Micro SD card during taking pictures or recording, otherwise the images obtained
during shooting may be lost.
5. Do not disassemble or repair it yourself, otherwise you will not be able to enjoy the warranty policy.
6. The EH314 pod needs to cooperate with the data link to be used normally. Please use and install
correctly. Otherwise, the pod will not work properly or even burn out.
7. Please do not reset the login password, or you will not be able to log into the software.
Product Brief Introduction
Installation
The EH314 optical zoom pod adopts 3.5x optical zoom lens, a 1/2.3 CMOS sensor, and has 12 million
effective pixels, and a high-precision 3-axis gimbal with target tracking function. Can be widely used in
inspection, survey, monitoring and other fields.
1. Reparation for Installation
Supported device types
EH314 pods can be used with the Rainbow R1S data link, network video link, or other third-party network
video link to display images on the ground PC, tablet ipad, and mobile phone (Android), and realize
zooming and taking pictures. , recording video, gimbal moving and other controls. (third-party network video
link needs to support USB hotspot sharing or WiFi, then it can be used on mobile phones).
Work together with flight controller can get higher pointing accuracy and heading drift can be suppressed.
At the same time, information such as GPS of the flight control can be written into the photo or video
information.
If not connect to the flight controller, the information writing function such as GPS will be lost, but other
functions can still be used normally.
2. Supported Micro SD card type
Supports up to 128GB. Please use a Micro SD card of Class 10 or UHS-1 and above to ensure normal video
recording.
3. Install the Gimbal
1.Aim the EH314 slideway at the quick released slideway of the IDU gateway shock absorber plate and then
push in.
2.When hear a click , the locking mechanism is locked and the installation is completed (locking standard:
as shown in the figure below, can fully see the triangular arrow ).
3. Install the Micro SD card to the camera. A standard Micro SD card is recommended
3. Note
