Foxtech DA16 Radio Control System
User Manual
©
2018 FOXTECH All Rights Reserved
4
Precautions on Charging DA16 Transmitter
Precautions on Using SD Card
Precautions on Storage/Carrying/Recycling
Keep it away from places that a baby or a kid may reach while you are charging DA16 transmitter,
and better if there is supervision in case of accidents.
SD card is also an electronic product, keep it from static electricity.
Micro-SD card slot clean in case of blocking by sand or dirt.
Keep SD card in slot while you are downloading or uploading data; taking it out mistakenly,
hitting or shattering it may cause damage or data loss.
Keep SD card away from places that a baby or a kid may reach in case of swallowing mistakenly.
Keep DA16 transmitter away from places that a baby or a kid may reach when you are placing or
storing it.
Please avoid placing or storing DA16 transmitter at places below:
Places are extremely hot (above 60℃) or cold (under 20℃);
Places with direct sunshine, too dusty or wet;
Places with an unstable structure or may cause vibration;
Places near steam or other heat sources.
Do not disassemble, bend, press, abandon or damage SD card by any means.
Stop using the SD card if you find it soaked by water, oil or other chemical liquid.
DA16 transmitter is equipped with a built-in Li-Po 1S rechargeable battery, compatible with standard USB
chargers (5V/2A output) in market.
Considering there are many different types of chargers, please read the prohibited and mandatory carefully
before charging DA16 transmitter.
Do not use USB chargers over 5V output to charge DA16 transmitter.
Make sure DA16 transmitter is powered off before charging, charging current should not exceed 2A.
Stop charging if you find charger damaged, broken or overheated.
Stop charging if you sense a peculiar smell, smoke or leak.
Do not charge DA16 transmitter when the temperature is over 60 degree centigrade.
