Bi-Focus
User Manual
©
2019 FOXTECH All Rights Reserved
23
Maintenance
Daily maintenance
-Please put it in the factory packing box during transportation. If there is no packing box, please put it in a
soft environment such as foam;
-After the using of the gimbal and camera, turn off the system power and unload the gimbal from the drone
to extend the effective using time of the drone system;
-When the gimbal is stored for a long time or not working, it should be kept in a cool and dry environment as
much as possible;
-Do not use a chemical solvent, thinner to clean the gimbal case. It can be wiped with a clean, soft and dry
flannelette;
-The lens of the camera is an important optical component, avoid oil stains and various chemical substances
damaging the lens surface during installation and use. Please use the special lens cloth to clean the lens
surface, and also take care to protect it when storing it.
- If not use for a long time, the function should be energized every week, and check the function, the
mechanical interface and electrical interface of the product every half month, clean the lens, and thoroughly
check the product every month.
Maintenance procedures and methods
-Use a clean, soft, dry flannel to remove dust and other debris from the surface;
-The task load is correctly connected to the drone, and after confirming that the connection is correct,
power on and check again.
-After normal work, adjust and test function through the handheld terminal of the drone, and find the problem
,keep detailed records.
-If the problem cannot be solved by the method in this instruction manual, please contact us.
