FOXTECH BABY SHARK 260 VTOL
User Manual
©
2019 FOXTECH All Rights Reserved
24
1. Baby Shark Pixhawk Basic Settings for Reference.
Some default setttings in Pixhawk for Baby Shark.
2. Suggested ”Q_VFWD” is: 0.05 , this setting will increase anti-wind performance in QLOITER mode and
Vtol-take off and landing.
3. Suggested “Q_WVANE_MINROLL” value is: 3
4. Suggested “ALT_HOLD_RTL” value is: 5000, default home altitude, 50m is a good number for Vtol-
landing.
Default Setttings
6. Suggested “BRD_SAFETYENABLE” value is: 1, always important to have the safety switch on after power
on, you will need to press the safety switch on the GPS for 2 second to active the plane to fly.
5. Suggested “Q_RTL_MODE” value is: 1, if you prefer the plane go circles around the Home point instead
of go into Vtol-landing during RTL ,change it to 0.
