27 |
P a g e
stereo mode allows you to flip the left and right audio channels. For
example, if you have a stereo sound (coyote on left channel, rabbit on right
channel), but you would prefer that each sound come out of the opposite
speaker, simply select reverse stereo mode. This can be changed during
sound playback.
NOTE:
Make sure you have read and understand the FOXFADE
section as making changes here will directly affect how FOXFADE
will work.
PLAY MODES
This menu allows you to specify which play mode the FURY 2 will operate
on. To change the play mode, use the selector to highlight the desired
option then press down on the selector knob one time:
REPEAT MODE
(plays sounds/sequences continuously)
SINGLE PLAY MODE
(plays sounds/sequences once)
JUKEBOX MODE
(plays sounds/sequences incrementally)
NOTE:
By default, REPEAT will be set as the play mode.
AUTO-V ON & AUTO-V OFF
You can turn AUTO-V on or off by highlighting the desired one and press
down on the selector knob one time. See section on AUTO-V for more
details.
7.2 TX505 CONFIG MENU
This menu allows to you setup how the TX-505 will operate. Everything from
contrast to how the AUX button performs will be configurable through these
menus.
AUX
This option allows you to specify whether the AUX function will be
momentary or latched. To change the AUX settings, use the selector to
highlight the desired option then press down on the selector knob one time.
NOTE:
FOXPRO
®
’s Jack-in-the-Box Decoy requires that the AUX
function be setup for momentary. Please check the specifications on
the device you are trying to operate prior to connecting it to your
FURY 2.
DISPLAY
The display menu has many submenus that will customize the TX-505.
Each one will be discussed. To enter the submenu, simply highlight the
desired one and press down on the selector knob one time.
Summary of Contents for FURY 2
Page 1: ......
Page 35: ...35 P a g e...
