FoxGate S6424-S2C2 series, Configuration Manual

Page: 39 / 286

Ethernet Port Configuration
39
4.2.1.6 Basic Port Configuration
Following basic port configurations are in the interface configuration mode.
Table 4-7 Basic port configuration
Operation Command Description
Disable specific port shutdown By default, the port is enabled. If you want
to re-enable the port, use no shutdown
command.
Configure duplex of a
port duplex { auto | full |
half }
no duplex
10/100/1000BASE-T supports full duplex,
half duplex and auto-negotiation;
1000BASE-X supports full duplex and
auto-negotiation. By default, the working
mode is auto. If duplex is auto, the speed
will be auto.
Configure speed of a
port speed { speed-value |
auto }
no speed
10/100/1000BASE-T supports 10Mbps,
100Mbps and 1000Mbps; 1000BASE-X
supports only 1000Mbps. By default, the
speed is auto. If the speed is auto, the
duplex will be auto.
Configure priority of a
port priority priority-value
no priority
Priority-value could be 0 to 7 and the
default interface priority is 0. The larger the
priority value is, the higher the priority is.
And the packet with the higher priority will
be quickly handled.
Configure port
description description
description-list The description is used to distinguish ports.
By default, the description of a port is
empty.
4.3 Combo Port
A combo port is formed by two Ethernet ports on the panel, one of which is an optical port
and the other is an electrical port. For the two ports forming a combo port, only one works at a
given time. They are TX-SFP multiplexed. You can specify a combo port to operate as an
electrical port or an optical port as needed. That is, a combo port cannot operate as both an
electrical port and an optical port simultaneously.
Generally, if both electrical port and optical port are all inserted, only electrical port can
work. If user wants to use optical port, please unplug the electrical port.
4.4 Enable/Disable Ingress Filtering
If ingress filtering is enabled, the received 802.1Q packets which do not belong to the
VLAN where the interface locates will be dropped. The packet will not be dropped if the