8
9
WARRANTY AND OTHER
INFORMATION
PRODUCT DURABILITY
Meets NFPA 1971-2007 Fire
Resistant Requirements: 500°F
(260°C) for 30 minutes
REFLECTIVE STICKER
For P/N 940K-010FI & 940K-010RSC
only. For your safety, and increased
visibility, a reflective sticker (enclosed
in box) may be placed on the side of
the SideSlide.
CARE/CLEANING
Your FoxFury product is a
professional tool, but regular
maintenance and care of your light
will maximize performance for you. As
needed, wash your FoxFury product
using a soft washcloth, clean water
and a mild soap. Be sure that the
flashlight’s Tailcap is SEALED before
washing. When done, pat dry with a
damp cloth.
AVAILABLE ACCESSORIES
C-Clamp Adaptor, P/N 85-010
Bolt Adaptor, P/N 85-011
Picatinny Adaptor, P/N 85-012
Flashlight for C-Clamp & Bolt
P/N 940-010FI
Flashlight for Picatinny
P/N 940-012
Pressure Switch Cap
(Picatinny Only), P/N 50-150
WARNINGS
FoxFury, LLC is not responsible for
the incorrect use of any FoxFury
Lighting product.
Lights are strong enough to
cause damage to the human eye.
Do not stare into LEDs for long
periods of time or from a close
range (less than 2 ft).
FoxFury, LLC is not responsible
for any injury or damage caused
during the use of this product.
Usage of this product must be
supervised by an adult when it is
being used by a minor.
Any FoxFury product should
be operated at speeds safe
enough to maneuver around
surrounding obstacles.
Do not use under the influence
of drugs or alcohol.
LIMITED WARRANTY
FoxFury, LLC (“FoxFury”) warrants
to the purchaser of this product
(“Buyer”) that for a period of two
years following purchase, this product
will be free from defects in material
and workmanship and will function in
substantial compliance with FoxFury’s
written specifications for this product
as specified in the instruction manual
or on FoxFury’s website located at
www.FoxFury.com. Buyer’s exclusive
remedy shall, in any case, be limited,
at FoxFury’s election, to: A) repair or
replacement of the defective product;
or B) refund of the purchase price for
this product.
INSTALLATION OF YOUR
SIDESLIDE MOUNT
SIDESLIDE BOLT
This mount has the ability to rotate and provide usable light at eight (8) distinct
positions, every 45
°
.
NOTE: Three (3) M4.0 Cap Head screws are needed to attach the mount to a
helmet. Length of screws is determined by thickness of the users helmet.
SIDESLIDE PICATINNY
Mounts on rifle, shotgun and helmet with Picatinny/MIL-STD 1913 rail.
NOTES
IPX7
1 M
2 M
