7
5.
Tighten each screw until the units are mated.
6.
The EXOLANDER
©
installation is now complete.
7.
To install the Landing Skid, align each Tab on Landing Skid with each
Slot on the EXOLANDER
©
Landing Foot. Press and snap Landing Skid
on.
WARNING:
Manually test the EXOLANDER
©
Landing System by wiggling it and making
sure nothing is loose. Note that a small amount of movement between the
structure and the UAV has been created, at the request of AUTEL, to
eliminate adding unnecessary forces to the vehicle’s structure.
Summary of Contents for Tacswan EXOLANDER 700-3AR-II
Page 19: ...08 2021...
